Tauring Machines
ALFA SERIES BENDERS
The
Alfa series are three driving roll machines which can be
supplied with 40mm, 50mm, 70mm, 100mm, 150mm and 250mm.
Capacities can vary depending on model from 1/4" to 10"
angle. These machines can be supplied with either hydraulic
push-button systems or CNC Controls such as CNC-C 20 program
/ 30 steps, CNC-S 40 program /100 steps or CNC-8 unlimited
Touch Screen Control with up to 250 steps. Please let us
know on the material you intend to bend for our
recommendation of equipment.
ALPHA SERIES BENDERS
The Alpha benders were designed specifically for bending
large sections. As you can see from pictures above we are
bending structural H Beam and large angle sections. Sizes
vary up to a 20" pipe size.
DELTA SERIES BENDERS
The Delta series "Pyramid Style" are three driving roll
machines which can be supplied with 40mm, 50mm, 60mm, 80mm
shafts. Capacities can vary depending on model from 1/4" to
4" angle. These machines can be supplied with either
hydraulic push-button systems or CNC Controls such as CNC-C
20 program / 30 steps, CNC-S 40 program /100 steps or CNC-8
unlimited Touch Screen Control with up to 250 steps. Please
let us know on the material you intend to bend for our
recommendation of equipment.
SLALOM SERIES BENDERS
The Slalom series has a "International Patent" and is
known for its left and right bending capabilities. The
Slalom 20 and 50 are equipped with "4" driving rolls, "2"
guiding rolls and "2" bending rolls while the Slalom 60 is
well equipped with "6" driving rolls and "2" bending rolls.
The only options of controls on this series is the CNC-S 40
program /100 steps or CNC-8 unlimited Touch Screen Control
with up to 100 steps. Please let us know on the material you
intend to bend for our recommendation of equipment.
Standard characteristics:
- Left and right bending
- Bending rolls with hydraulic adjustment with numerical control
- Possibility of operating equipment in manual or automatic cycle
- Bending in scalar or progressive adjustment to execute bending radii perfectly joined together, thus avoiding any deformation or collapsing, also an advantage when bending material with thin walls.
- 4 or 6 driving rolls guide the material to the bending rolls
- 2 "Fold-away" rolls carry out the bending process
PLATE BENDERS
Hydraulic plate bending machine with 3 or 4 bending
rolls. Each of the roll is independently controlled by
hydraulic motor coupled with an epicyclical reduction-gear.
The central roll positioning is controlled by joy-stick,
while the roll inclination is controlled by button or
mechanical register. Control panel with 3 intelligent quote
positioners (PQi) for the automatic rolls positioning and
for the bending radii predetermination